Find The Best Airco Installateur In Gent

Before you get to work in an air conditioning installation, it is necessary to take into account several super important points. Installing an air conditioning machine and doing it well is not something that is available to many, I say this because several small details make the difference and very few consider when starting to work, as the installation without make blankness. Read guide on how to install air conditioner by Airco installateur in Gent.

Things like the location of the equipment (interior and exterior), for example, can greatly condition the correct operation of the equipment and the conditioning and comfort of the place where it is installed.

Before starting the installation or buying the air conditioning, you must take into account the power you need for the place to air-conditioning.

Location Of Indoor And Outdoor Unit

Whenever you go to mount an air conditioning, first of all, is to see where you are going to place the two units (interior and exterior) taking into account that depends on where they place their operation, performance and comfort can change enormously.

Many of the faults that occur in the air conditioning come mainly due to a poor location of one of the 2 machines.

Indoor unit

In the case of the indoor unit, the first thing you have to keep in mind is that the air leaving the machine cannot fully give us when it is working, i.e., if you want to install an air conditioner in a room you will never put the console facing the sofa.

With this in mind, you will always get maximum comfort and optimum air conditioning for people.

Drain And Electric Current

Now you have to take into account that the indoor unit needs a drain to evacuate the water generated by condensation and an electric outlet to operate. Depending on the type of machine (split, conduit, etc.), you have to see what options you have to evacuate the water and make the electrical connection.

The normal thing in a split installation, which is the most frequent, is to put the drain to the outside of the house (unless we have pre-installation and it already has a drain). Depending on where you have to take the drain, you will have to put the machine.

The drainage of an air conditioner has to carry some slope so that the water flows by its own weight, and there are no problems of dripping, for it is not convenient to put many meters of linear drainage. Thus you ensure a good evacuation of the water of condensates and a good aesthetic inside and outside your house.

Following the example of a split console, the electric current can be taken from a nearby plug, so it is also convenient to put the split as close to one not to have many meters of cables and gutters, thus preserving a good aesthetic in your living room or place where you do the installation.

It is therefore important that when installing an air conditioner take into account these 3 points for the location of the indoor unit:

  • That does not direct air to people.
  • Proximity to the street (or drain enabled) to evacuate the water.
  • Near power outlet.

These 3 points are part of the location of the equipment and should always be taken into account before the installation.

Outdoor Unit

In order to locate the outdoor unit correctly, it is advisable to avoid areas where the direct sun to the machine. Although they come prepared for extreme weather conditions, if you avoid the direct sun your air conditioning equipment will work much better, and its useful life will be much longer since it will wear out due to the weather conditions will be minimal.

Especially in places where the summer sun is very strong, it is recommended that it is not exposed since apart from wear, you avoid problems due to high condensation pressures.

When the sun is very strong, and the ventilation of the outside machine is not good, you run the risk of the gas pressure increases and the machine not working properly. It is therefore advisable that the outdoor unit is protected from the sun and has good ventilation.

In places where the sea is very close, it is necessary to take into account that sea salt corrodes all the metallic components of the machine with the passage of time, to minimize this it is advisable to orient the machine so that the fan is looking at the sea. In this way you achieve that when the air conditioning works, it absorbs as little as possible the machismo, thus avoiding problems of corrosion.

The Most Important Points For The Location Of The Outdoor Unit Are:

  • Avoid direct sunlight.
  • Good ventilation.
  • Avoid Mariano.
  • What you need for installation

At this point, you will see what tools and materials you need for a correct installation of air conditioning. As you can see, many tools are not frequent in the “toolkit of a home,” so if you want to do the installation yourself, you will have to spend some euros or ask professional Airco installateur in Gent.

Thread Tools

  • Screwdriver kit or electric screwdriver.
  • Cut threads or pliers.
  • Pipe cutter.
  • Set of fixed keys and English.
  • Springs for curves or bending machine.
  • Pressure gauges.
  • Vacuum
  • materials
  • Copper pipes (From the required section).
  • Shell Thermal insulation for pipes.
  • Cables or wires for interconnection and power supply.
  • Insulating tape.
  • PVC drain pipe.
  • Screws and cleats.
  • Glue for PVC.
  • Supports for the outdoor

Pre-Installation Tips

First of all, we recommend that you take a look at an air conditioning installation with pre-installation.

The installation of a split air conditioner (thus roughly) consists of the placement of the inner machine and the realization of a hole in the wall to remove all the tubes and interconnections that go from machine to machine.

Subsequently, once you have passed the pipes and cables from one machine to another, it is time to assemble the outdoor unit, but you will have to place a support if hung on the wall, or legs to put it on the floor (depending on the location you have chosen).

Obviously to do an installation of air conditioning has to take into account many more things, including a specific technical knowledge to solve any problem or breakdown, since not everything always works well at first.

There are times when you finish assembling your air conditioner you realize that it does not work well or does not cool. If you do not have a technical preparation, you can hardly find the problem.

Airco installateur in Gent

That’s why we recommend an Airco installateur in Gent or a company specializing in air conditioning, because by many tutorials that you see on the Internet or elsewhere, the installation of an air conditioner can become more complicated than you think.

What Price Can An Air Conditioning Installation Have?

The price of an air conditioning installation depends a lot on the amount of material that we have to use in carrying it out. Not to mention that depending on the cooling power of the machine this will be more or less expensive.

But based solely on the installation of a split, for example, we can say that an installation can go from 200 € onwards, depending on the materials and working hours of the same.

If you want to install a ducted air conditioner, the price can be much higher, since it needs a grid placed in the rooms and ducts to channel the air, in addition to having to “hide” ducts and interior machine with a false ceiling. This makes the installation quite expensive.

If you have any question visit the official website www.climavert.be